Loading
AluminaAlumina5 l. temu
I took a ton of pictures of this nendoroid for my friend...might as well share it. Sorry for the bad quality, I don't have a nice camera to use, so I just used my phone.
Pokaż zawartość spoileraUkryj zawartość spoilera
http://s1.tsuki-board.net/upload/pictures/2015/03/17/1246592.jpeg

http://s1.tsuki-board.net/upload/pictures/2015/03/17/1246596.jpeg
http://s1.tsuki-board.net/upload/pictures/2015/03/17/1246593.jpeg
http://s1.tsuki-board.net/upload/pictures/2015/03/17/1246591.jpeg



It's the same standard box as most of the new nendoroids. Nothing special other than the colors. The pictures of I-401 are quite cute though.


Getting to the parts:

http://s1.tsuki-board.net/upload/pictures/2015/03/17/1246597.jpeg

I was really impressed with the amount of accessories and parts it came with. When I first looked at the other KanColle Nendoroids I thought this would have less because of the price.

http://s1.tsuki-board.net/upload/pictures/2015/03/17/1246619.jpeg

I wanted to highlight this accessory because it actually is a leather strap. It really went above and beyond what I was expecting. Really helps out on posing.

http://s1.tsuki-board.net/upload/pictures/2015/03/17/1246598.jpeg

It even came with mini stands to put the planes on and has a big stand in comparison to normal nendoroids.
Comparison:
Pokaż zawartość spoileraUkryj zawartość spoilera
http://s1.tsuki-board.net/upload/pictures/2015/03/17/1246605.jpeg


http://s1.tsuki-board.net/upload/pictures/2015/03/17/1246614.jpeg
http://s1.tsuki-board.net/upload/pictures/2015/03/17/1246617.jpeg

It also came with secondary parts to make sure everything fits. There's a second plug for using the body only, as opposed to I-401's ship armor. There's also a special made stand leg to fit the planes on the stand, as well as two legs to fit the firing torpedoes.

http://s1.tsuki-board.net/upload/pictures/2015/03/17/1246599.jpeg

I got one of the "defective" nendoroids. The only "problem" with the parts I saw was the fact that the joints weren't tanned. A bit concerning on the QA side, but nothing major. No problem with moving them, unlike my Amatsukaze...


http://s1.tsuki-board.net/upload/pictures/2015/03/17/1246600.jpeg
http://s1.tsuki-board.net/upload/pictures/2015/03/17/1246601.jpeg

I don't think these pictures do this justice, but my I-401 had a lot of paint smudges and a bit of it was overruning near the bottom of her shirt. I was not too happy about this, because it's really obvious up close.


Now for the fun part. I tried to recreate the pictures that were on Good Smile's website: www.goodsmile.i...

It was hard having all the parts everywhere, but I heard that's pretty much every Kancolle nendoroid ever. It was easier than Amatsukaze though and less scary though.


Pokaż zawartość spoileraUkryj zawartość spoilera
http://s1.tsuki-board.net/upload/pictures/2015/03/17/1246623.jpeg

http://s1.tsuki-board.net/upload/pictures/2015/03/17/1246624.jpeg

This one, the prototype looks like it can hold the strap, but in reality it can't...but I don't know how I would get the strap in there anyway. The hangar tube can also open and closes as advertised. I like this pose the best.


Pokaż zawartość spoileraUkryj zawartość spoilera
http://s1.tsuki-board.net/upload/pictures/2015/03/17/1246626.jpeg
http://s1.tsuki-board.net/upload/pictures/2015/03/17/1246625.jpeg
http://s1.tsuki-board.net/upload/pictures/2015/03/17/1246627.jpeg



This pose is also incredibly cute, never thought you could see sea warfare as cute. The only annoying part was having the planes behave, I had them fall off or tilt while I was setting everything else up.

Pokaż zawartość spoileraUkryj zawartość spoilera
http://s1.tsuki-board.net/upload/pictures/2015/03/17/1246649.jpeg
http://s1.tsuki-board.net/upload/pictures/2015/03/17/1246645.jpeg
http://s1.tsuki-board.net/upload/pictures/2015/03/17/1246646.jpeg
http://s1.tsuki-board.net/upload/pictures/2015/03/17/1246648.jpeg
http://s1.tsuki-board.net/upload/pictures/2015/03/17/1246647.jpeg



This one was the hardest one by far to set up. Something always fell off while I tried to put it on the stand. In fact in these pictures the bottom leg that's supposed to hold the torpedoes was really lazily done. (I'm pretty new to posing) It's a really enjoyable pose though.


http://s1.tsuki-board.net/upload/pictures/2015/03/17/1246654.jpeg

This one was really easy and very cute as well.


Pokaż zawartość spoileraUkryj zawartość spoilera
http://s1.tsuki-board.net/upload/pictures/2015/03/17/1246656.jpeg
http://s1.tsuki-board.net/upload/pictures/2015/03/17/1246657.jpeg
http://s1.tsuki-board.net/upload/pictures/2015/03/17/1246658.jpeg



Like a lot of the other KanColle Nendoroids, she had a half-damage base. Hers is pretty tame compared to certain other ones though. As a bonus, looks like only one part isn't tanned (I guess NSFW, as NSFW as a nendoroid could get...)
Pokaż zawartość spoileraUkryj zawartość spoilera
http://s1.tsuki-board.net/upload/pictures/2015/03/17/1246661.jpeg


Overall I was very impressed, it really exceeded my expectations. It was very close to the prototype and definitely one of my favorite nendoroids.

http://s1.tsuki-board.net/upload/pictures/2015/03/17/1246659.jpeg
5,634 wyświetleń • 0 ulubione7 komentarzy

Wyniki8/10

Sculpting
Painting
Posing
Base
Packaging
Enjoyment

Komentarze7

Shimakaze695 l. temu#2806756Great review. I was on the fence about getting her, but seeing some user pictures and hearing your opinions makes me want to get her to display along her Arpeggio doppleganger ITEM #198437. Thanks for the push lol!

No problem, I'm glad it was of some help.


Also while I'm at it, I went and tried to get a good picture of the joints and compared it to GSC's post: www.goodsmile.i...
http://s1.tsuki-board.net/image/600/Alumina1426618346.jpeg

I honestly can't tell if the prototype they show is just really exaggerated but from the looks of it I have the same color joint as the legs.
5 l. temu
Great review. I was on the fence about getting her, but seeing some user pictures and hearing your opinions makes me want to get her to display along her Arpeggio doppleganger ITEM #198437. Thanks for the push lol!
5 l. temu
mentalka5 l. temu#2806341What an interesting review, she is such a cutie, it's nice to see another tan Nendoroid besides Hana. :)
Also, she is supposed to have non-tanned leg joint, because they represent parts of her skin beneath the swimsuit that didn't get tanned. :D Wrong joints are the ones that are tanned. ;)


Yeah, I agree, it's incredibly cute.

hulipas5 l. temu#2806450www.goodsmile.i...
Have you asked GSC for a replacement for your nendoroid's leg joints? :)


I bought it off AmiAmi, and they said they would ship out the correct joints for free, regardless if I got the wrong joints or not, so I get a free set in the end. Supposed to come later this month I think.


zeixble5 l. temu#2806591The joints that this person got are actually the correct joints :3
The incorrect ones are tanned~~

littlelion5 l. temu#2806654Like Zeixble said, the joints of your legs aren't supposed to be tanned! So you got lucky :)

i think the joints I got were tanned, but I'm not sure anymore, I will have to double check later and compare to GSC's post. Now that I look at my pictures again it's really hard to tell with my phone camera quality.
5 l. temu
Like Zeixble said, the joints of your legs aren't supposed to be tanned! So you got lucky :)
5 l. temu
The joints that this person got are actually the correct joints :3

The incorrect ones are tanned~~

hulipas5 l. temu#2806450www.goodsmile.i...
Have you asked GSC for a replacement for your nendoroid's leg joints? :)
5 l. temu
www.goodsmile.i...
Have you asked GSC for a replacement for your nendoroid's leg joints? :)
5 l. temu
What an interesting review, she is such a cutie, it's nice to see another tan Nendoroid besides Hana. :)
Also, she is supposed to have non-tanned leg joint, because they represent parts of her skin beneath the swimsuit that didn't get tanned. :D Wrong joints are the ones that are tanned. ;)
5 l. temu